flat top milling - Page 2

Austin4x4 · 10-14-2009, 08:20 PM

i would also like this done to 2 sets of '04 knuckles that i have.

1GMC4x4 · 10-27-2009, 04:43 AM

Could you press on some new ball joints when I send the pair to get machined? if so How much would you charge?

bonedust · 10-27-2009, 07:33 AM

you can put my on the list for a flattop BJ60 job with new BJ's also!!!

boost_aholic97 · 10-27-2009, 06:09 PM

i don't know if this would be too much of a request or if you already do it but: can you machine a set of HP 44 knuckles with a key way and do you sell the high steer arms with the key way? kind of like the Sky set up, but i would much rather go with ballistic than sky.....

DrVic723 · 10-27-2009, 07:59 PM

Not a problem at all, send them our way.

Grapehead · 10-29-2009, 08:14 AM

can you send me your address, payment info, and total cost for doing a pair of 44 knuckles, shipped to and from 27703 business address?

and what is the approximate turnaround time?

thanks!

iwishihad1 · 11-05-2009, 08:10 PM

do you have any idea on what the turn around time would be. im in va, so im guessing 3-4 days of shipping there

DrVic723 · 11-05-2009, 10:21 PM

2-3 days depending on our schedule at the time. When you're ready to ship them let me know and I'll give you an accurate lead time at that point.

Jeff

DrVic723 · 11-05-2009, 10:21 PM

Quote:

Originally Posted by Grapehead

can you send me your address, payment info, and total cost for doing a pair of 44 knuckles, shipped to and from 27703 business address?

and what is the approximate turnaround time?

thanks!

These types of deals need to be taken care of over the phone to avoid confusion. Lead time is 2-3 days as stated above.

Jeff

Ballistic Eng · 11-06-2009, 11:09 AM

Final word on Pricing

Standard flat top mill job
40$ Pair
30$ Per Side

Add 10$ each with keyways

For keyways we will need the specs that you want. Balljoint 60's are 70$ per pair right now.

For further information or questions please call the shop at (520) 888-4441

CowboyKyle · 11-06-2009, 11:16 AM

Quote:

Originally Posted by Ballistic Eng

Final word on Pricing

Standard flat top mill job
40$ Pair
30$ Per Side

Add 10$ each with keyways

For keyways we will need the specs that you want. Balljoint 60's are 70$ per pair right now.
For further information or questions please call the shop at (520) 888-4441

What arms do these accept?
What year model of D60s?

Ballistic Eng · 11-06-2009, 05:43 PM

Standard 4 bolt kingpin axles. We're working on further development for the balljoint 60's.

CowboyKyle · 11-06-2009, 05:46 PM

Quote:

Originally Posted by Ballistic Eng

Final word on Pricing

Standard flat top mill job
40$ Pair
30$ Per Side

Add 10$ each with keyways

For keyways we will need the specs that you want. Balljoint 60's are 70$ per pair right now.

For further information or questions please call the shop at (520) 888-4441

Quote:

Originally Posted by Ballistic Eng

Standard 4 bolt kingpin axles. We're working on further development for the balljoint 60's.

Does that mean you typoed? or did I misunderstand....?

Ballistic Eng · 11-06-2009, 08:24 PM

No, it means I can machine it to whatever you want, but I don't know if it will fit anything at this time. A conclusive setup from us is still in line for development.

mechanicalmongoose20 · 11-07-2009, 02:51 AM

ok, so i already have new ball joints pressed in, and its a ford D44 so the drivers is already done. How much to press out the ball joints( assuming you need to so you can face them) mill and drill/tap passenger side, mill and re-tap drivers side, and press ball joints back in? Also, can you give a print of the locations of said drilled and tapped holes? i'm going to make my own high steer arms without spacers, but an extra 2" to clear the leafs. Thanks

iwishihad1 · 11-07-2009, 02:06 PM

any chance that if i ordered the arm, and hardware kit at the same time as i got the milling done you guys could install the arm, or would there be added price

no big deal if not

10-14-2009, 08:20 PM	#26
Austin4x4 Wheeler Join Date: Dec 2008 Member # 124844 Location: Centennial CO. Posts: 244	i would also like this done to 2 sets of '04 knuckles that i have. __________________ 2005 TJ Unlimited 4.7L Stroker, 35's. eventialy 1 tons and 40's

10-27-2009, 04:43 AM	#27
1GMC4x4 Registered User Join Date: Jul 2004 Member # 33716 Location: San Jose, CA Posts: 353	Could you press on some new ball joints when I send the pair to get machined? if so How much would you charge? __________________ 69' GMC 454TBI, 465, 205, H.A.D. Locked 1-Tons, 52's, 39" IROK's, TR beadlocks. 94' GMC soon SAS

10-27-2009, 06:09 PM	#29
boost_aholic97 Registered User Join Date: Oct 2007 Member # 101155 Location: New Mexico Posts: 54	i don't know if this would be too much of a request or if you already do it but: can you machine a set of HP 44 knuckles with a key way and do you sell the high steer arms with the key way? kind of like the Sky set up, but i would much rather go with ballistic than sky..... __________________ '00 Tacoma-Locked Armored---'92 Civic- 10.1@142 SnailHouse Projects-Turbo Manifolds

10-27-2009, 07:59 PM	#30
DrVic723 4K RPMs of death Join Date: Apr 2005 Member # 46226 Location: Tucson Az. Posts: 1,918	Not a problem at all, send them our way. __________________ Ballistic Fabrication 520.888.4441 sales@ballisticfabrication.com In house CNC Laser cutting and forming - In house CNC milling and turning! Watch our Laser, press brake, mills and lathes in action!

10-29-2009, 08:14 AM	#31
Grapehead Registered User Join Date: Jun 2003 Member # 20374 Location: Raleigh, NC Posts: 425	can you send me your address, payment info, and total cost for doing a pair of 44 knuckles, shipped to and from 27703 business address? and what is the approximate turnaround time? thanks! __________________ you just don't mess with a man's alcohol. shakes head disapprovingly when are people gonna learn? [QUOTE=Harry Johnson]If Jesus reads pirate4x4, we're ALL screwed.[/QUOTE]

10-27-2009, 07:33 AM	#28
bonedust Registered User Join Date: May 2009 Member # 135902 Posts: 10	you can put my on the list for a flattop BJ60 job with new BJ's also!!!

11-05-2009, 08:10 PM	#32
iwishihad1 Registered User Join Date: Sep 2007 Member # 99055 Posts: 485	do you have any idea on what the turn around time would be. im in va, so im guessing 3-4 days of shipping there

11-05-2009, 10:21 PM	#33
DrVic723 4K RPMs of death Join Date: Apr 2005 Member # 46226 Location: Tucson Az. Posts: 1,918	2-3 days depending on our schedule at the time. When you're ready to ship them let me know and I'll give you an accurate lead time at that point. Jeff __________________ Ballistic Fabrication 520.888.4441 sales@ballisticfabrication.com In house CNC Laser cutting and forming - In house CNC milling and turning! Watch our Laser, press brake, mills and lathes in action!

11-06-2009, 11:09 AM	#35
Ballistic Eng BallisticEngineering Join Date: Dec 2008 Member # 124890 Location: Tucson, Arizona Posts: 105	Final word on Pricing Standard flat top mill job 40$ Pair 30$ Per Side Add 10$ each with keyways For keyways we will need the specs that you want. Balljoint 60's are 70$ per pair right now. For further information or questions please call the shop at (520) 888-4441 __________________ *Ballistic* Fabrication For Engineering and Design Related Questions contact ENG@Ballisticfabrication.com

11-06-2009, 05:43 PM	#37
Ballistic Eng BallisticEngineering Join Date: Dec 2008 Member # 124890 Location: Tucson, Arizona Posts: 105	Standard 4 bolt kingpin axles. We're working on further development for the balljoint 60's. __________________ *Ballistic* Fabrication For Engineering and Design Related Questions contact ENG@Ballisticfabrication.com

11-06-2009, 08:24 PM	#39
Ballistic Eng BallisticEngineering Join Date: Dec 2008 Member # 124890 Location: Tucson, Arizona Posts: 105	No, it means I can machine it to whatever you want, but I don't know if it will fit anything at this time. A conclusive setup from us is still in line for development. __________________ *Ballistic* Fabrication For Engineering and Design Related Questions contact ENG@Ballisticfabrication.com

11-07-2009, 02:51 AM	#40
mechanicalmongoose20 Registered User Join Date: Sep 2008 Member # 120626 Location: Martinsville, Indiana Posts: 199	ok, so i already have new ball joints pressed in, and its a ford D44 so the drivers is already done. How much to press out the ball joints( assuming you need to so you can face them) mill and drill/tap passenger side, mill and re-tap drivers side, and press ball joints back in? Also, can you give a print of the locations of said drilled and tapped holes? i'm going to make my own high steer arms without spacers, but an extra 2" to clear the leafs. Thanks __________________ 79 CJ-5, 258 bored .03", 4Brl, header, Dana 60, Dana 44 and some other things i havent figured out!

11-07-2009, 02:06 PM	#41
iwishihad1 Registered User Join Date: Sep 2007 Member # 99055 Posts: 485	any chance that if i ordered the arm, and hardware kit at the same time as i got the milling done you guys could install the arm, or would there be added price no big deal if not

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode