GM LSx series EVAP elimator "plug" kit

rockcity · 10-31-2009, 09:39 PM

When installing these engines into our rigs, there is no need for the EVAP sensor on the top of the intake just behind the throttle body.

So you don't have to leave that pesky EVAP sensor in there or so you don't have to silicone a bolt in there, I've developed this little "kit" to eliminate the EVAP sensor and plug the hole. Simple but effective

In this kit, you'll get a tapered rubber plug and the retainer tab as shown in the picture below. You'll re-use the same bolt that retains the EVAP sensor.

I haven't seen all the applications of the GM EVAP and where they are located in on the engine. However, I know this fits the truck/van 6.0/5.3/4.8. It may fit others. Maybe the GTO and Corvette experts will chime in and let us know if the EVAP sensor is the same.

$10 shipped in lower 48

Why spend the time to draw, drill, and cut the metal plus the time to drive to the store to search for a plug? I've done all the homework for you. Save time in your build and pick this up and use your valuable time working on more important things

rockcity · 11-04-2009, 03:13 PM

wow, these things are more popular than I thought!

jeep09 · 11-04-2009, 04:40 PM

how do I pay you shipped to 98295

rockcity · 11-04-2009, 06:36 PM

I'm working on my website. Until then, I'll go with paypal or MO via mail.

PM sent

BACRAKR · 11-04-2009, 09:42 PM

This would not work on a LS1 or LS6 intake. They can be plugged with a vacum plug. I think the LS7 and LS2 are the same way, but I'm not all that sure. I don't haven't messed with them as much.

Yeah, no wonder they are selling like crazy, EVAP blows!

rockcity · 11-04-2009, 10:30 PM

Quote:

Originally Posted by BACRAKR

This would not work on a LS1 or LS6 intake. They can be plugged with a vacum plug. I think the LS7 and LS2 are the same way, but I'm not all that sure. I don't haven't messed with them as much.

Yeah, no wonder they are selling like crazy, EVAP blows!

I wouldn't have thought they work on those engines.

I only have experience with them on the LQ4 engines.

Thanks for the tech.

rockcity · 11-09-2009, 11:37 AM

more out the door. thanks for the orders, guys.

rockcity · 11-17-2009, 10:43 AM

all orders have been shipped.

Thanks for the orders guys!

10-31-2009, 09:39 PM	#1
rockcity Racing at its best Join Date: Jan 2006 Member # 64837 Location: NC Posts: 950 Blog Entries: 2	GM LSx series EVAP elimator "plug" kit When installing these engines into our rigs, there is no need for the EVAP sensor on the top of the intake just behind the throttle body. So you don't have to leave that pesky EVAP sensor in there or so you don't have to silicone a bolt in there, I've developed this little "kit" to eliminate the EVAP sensor and plug the hole. Simple but effective In this kit, you'll get a tapered rubber plug and the retainer tab as shown in the picture below. You'll re-use the same bolt that retains the EVAP sensor. I haven't seen all the applications of the GM EVAP and where they are located in on the engine. However, I know this fits the truck/van 6.0/5.3/4.8. It may fit others. Maybe the GTO and Corvette experts will chime in and let us know if the EVAP sensor is the same. $10 shipped in lower 48 Why spend the time to draw, drill, and cut the metal plus the time to drive to the store to search for a plug? I've done all the homework for you. Save time in your build and pick this up and use your valuable time working on more important things Attached Images __________________ East Coast Offroad Racing Series www.ECORS.com ECORS would like to thank our vendors and sponsors: Chris Brower (snappy1978), Authorized SNAP ON Dealer Mud Pro Metalworks www.mudprometalworks.com Iron Pig Offroad www.ironpigoffroad.com 4x4 Connection www.4x4connection.com Lake Norman Supply, Inc. www.lakenormansupplyinc.com Oliver's Custom Drive Shaft Winston Salem, NC 336-724-1021 12voltguy www.12voltguy.com

11-04-2009, 03:13 PM	#2
rockcity Racing at its best Join Date: Jan 2006 Member # 64837 Location: NC Posts: 950 Blog Entries: 2	wow, these things are more popular than I thought! __________________ East Coast Offroad Racing Series www.ECORS.com ECORS would like to thank our vendors and sponsors: Chris Brower (snappy1978), Authorized SNAP ON Dealer Mud Pro Metalworks www.mudprometalworks.com Iron Pig Offroad www.ironpigoffroad.com 4x4 Connection www.4x4connection.com Lake Norman Supply, Inc. www.lakenormansupplyinc.com Oliver's Custom Drive Shaft Winston Salem, NC 336-724-1021 12voltguy www.12voltguy.com

11-04-2009, 06:36 PM	#4
rockcity Racing at its best Join Date: Jan 2006 Member # 64837 Location: NC Posts: 950 Blog Entries: 2	I'm working on my website. Until then, I'll go with paypal or MO via mail. PM sent __________________ East Coast Offroad Racing Series www.ECORS.com ECORS would like to thank our vendors and sponsors: Chris Brower (snappy1978), Authorized SNAP ON Dealer Mud Pro Metalworks www.mudprometalworks.com Iron Pig Offroad www.ironpigoffroad.com 4x4 Connection www.4x4connection.com Lake Norman Supply, Inc. www.lakenormansupplyinc.com Oliver's Custom Drive Shaft Winston Salem, NC 336-724-1021 12voltguy www.12voltguy.com

11-04-2009, 09:42 PM	#5
BACRAKR Registered User Join Date: Jan 2009 Member # 128169 Location: OKLAHOMA Posts: 57	This would not work on a LS1 or LS6 intake. They can be plugged with a vacum plug. I think the LS7 and LS2 are the same way, but I'm not all that sure. I don't haven't messed with them as much. Yeah, no wonder they are selling like crazy, EVAP blows! Last edited by BACRAKR; 11-04-2009 at 09:42 PM.

11-09-2009, 11:37 AM	#7
rockcity Racing at its best Join Date: Jan 2006 Member # 64837 Location: NC Posts: 950 Blog Entries: 2	more out the door. thanks for the orders, guys. __________________ East Coast Offroad Racing Series www.ECORS.com ECORS would like to thank our vendors and sponsors: Chris Brower (snappy1978), Authorized SNAP ON Dealer Mud Pro Metalworks www.mudprometalworks.com Iron Pig Offroad www.ironpigoffroad.com 4x4 Connection www.4x4connection.com Lake Norman Supply, Inc. www.lakenormansupplyinc.com Oliver's Custom Drive Shaft Winston Salem, NC 336-724-1021 12voltguy www.12voltguy.com

11-04-2009, 04:40 PM	#3
jeep09 Newbie Join Date: Oct 2009 Member # 143697 Posts: 94	how do I pay you shipped to 98295

11-17-2009, 10:43 AM	#8
rockcity Racing at its best Join Date: Jan 2006 Member # 64837 Location: NC Posts: 950 Blog Entries: 2	all orders have been shipped. Thanks for the orders guys! __________________ East Coast Offroad Racing Series www.ECORS.com ECORS would like to thank our vendors and sponsors: Chris Brower (snappy1978), Authorized SNAP ON Dealer Mud Pro Metalworks www.mudprometalworks.com Iron Pig Offroad www.ironpigoffroad.com 4x4 Connection www.4x4connection.com Lake Norman Supply, Inc. www.lakenormansupplyinc.com Oliver's Custom Drive Shaft Winston Salem, NC 336-724-1021 12voltguy www.12voltguy.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode