Project : Lowrider - Page 7

WA-HCRC · 11-20-2009, 06:55 PM

Quote:

Originally Posted by XRAIDEDJ

is that my old tailgate?!!!!

why yes it is

WA-HCRC · Yesterday, 10:16 PM

tacked up with additional bracing for distortion reduction. Ready to weld rear sliders with a couple gussets.

gonna go TIG them together. All 1/4" with 1/2"x1/2" CR square. Timmay is a great designer

Yesterday, 10:16 PM	#152
WA-HCRC . Join Date: Nov 2004 Member # 39184 Location: Kirkland, WA Posts: 1,656	tacked up with additional bracing for distortion reduction. Ready to weld rear sliders with a couple gussets. gonna go TIG them together. All 1/4" with 1/2"x1/2" CR square. Timmay is a great designer Attached Images __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode