pulled an axle, need numbers

evilram · 11-04-2009, 09:52 PM

sorry about the newby question.

just pulled a front axle out of a 04 f250. trying to figure out the gear ratio, spline count, etc.

We got the gear ratio and confirmed it is an open carrier. What spline count do these hogs have?

fordxranger · 11-04-2009, 10:22 PM

a metric bolt pattern and unit bearings.

evilram · 11-04-2009, 10:52 PM

really... thanks for the update on that...

maybe I should specify what I allready know beyond that, its kinda round, has ujoints, runs a 8x170....really man????

Does anyone know the spline count on these hogs? We pulled the gear ratio allready.

1sicbronconut · 11-05-2009, 12:09 AM

Should be 35 spline inner and 30 spline outers. I've got a axle from one laying on the floor at work I can check Thursday.

fordxranger · 11-05-2009, 04:22 AM

Quote:

Originally Posted by evilram

really... thanks for the update on that...

maybe I should specify what I allready know beyond that, its kinda round, has ujoints, runs a 8x170....really man????

Does anyone know the spline count on these hogs? We pulled the gear ratio allready.

I was failing at internet sarcasm, I figured you already new that. why would you want one of these? I would only run one of these in the truck it came out of.

11-04-2009, 09:52 PM	#1
evilram Registered User Join Date: Nov 2004 Member # 39108 Location: Colorado Posts: 140	pulled an axle, need numbers sorry about the newby question. just pulled a front axle out of a 04 f250. trying to figure out the gear ratio, spline count, etc. We got the gear ratio and confirmed it is an open carrier. What spline count do these hogs have? __________________ "The cost of government is directly proportionate to the morality of the people"-Mike Huckabee Last edited by evilram; 11-04-2009 at 11:12 PM.

11-04-2009, 10:22 PM	#2
fordxranger Registered User Join Date: Nov 2005 Member # 57069 Location: seattle Posts: 89	a metric bolt pattern and unit bearings. __________________ 89 Ford Ranger: Gathering parts for SAS. 92 Ford Explorer Sport: New DD.

11-04-2009, 10:52 PM	#3
evilram Registered User Join Date: Nov 2004 Member # 39108 Location: Colorado Posts: 140	really... thanks for the update on that... maybe I should specify what I allready know beyond that, its kinda round, has ujoints, runs a 8x170....really man???? Does anyone know the spline count on these hogs? We pulled the gear ratio allready. __________________ "The cost of government is directly proportionate to the morality of the people"-Mike Huckabee

11-05-2009, 12:09 AM	#4
1sicbronconut Granite Guru Join Date: Nov 2004 Member # 37866 Location: Farmington NM Posts: 709	Should be 35 spline inner and 30 spline outers. I've got a axle from one laying on the floor at work I can check Thursday. __________________ RIP Ein the wheeling Corgi

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode